Gasboy MS7120 Bar Code Scanner Setup Uživatelský manuál stáhnout pdf (Strana 5)

MDE-4631 Metrologic® MS7120 Bar Code Scanner Setup · January 2007 Page 5

Setting Up the Scanner

To set up the scanner, proceed as follows:

1 Turn off power to the Profit Point Point of Sale (POS) terminal.

2 Unplug the AC power to the POS Distribution Box (D-Box) power supply.

3 Remove the scanner and the Metrologic cable from the shipping box.

Note: None of the other parts in the shipping box, including the scanner power transformer,

will be used with this installation.

4 Insert the phone jack end of the scanner cable into the phone jack connector on the scanner

(

Figure 1 on page 6).

5 Connect the DB9 connector on the scanner cable to the scanner port on the POS D-Box

(

Figure 1 on page 6).

6 Plug in the POS D-Box power supply to the AC outlet (Figure 1 on page 6).

7 Turn on the Profit Point POS terminal. Follow the instructions that appear on the screen. The

Profit Point terminal initializes and begins the POS operations.

1 2 3 4 5 6 7 8 9 10 ... 13 14

Žádné komentáře

Gasboy MS7120 Bar Code Scanner Setup Uživatelský manuál Strana 5