Gasboy CFN III Quick Reference Guide v3.3 Uživatelský manuál stáhnout pdf (Strana 42)

CFN III Quick Reference

Page 38 MDE-4483 CFN III Quick Reference Guide v3.3 · August 2005

Test Mode

To activate test mode, open the island card reader

door, flip the S3 switch on the CPU board to TEST,

and press START OVER on the keypad. (The unit

must remain open during tests.) The keypad is now

enabled for selecting one of the 9 test routines:

1 test front panel lights for paper low and paper

out on receipt printer

2 test the table messages

3 test printer

4 test DES

5 test alphanumeric display

6 test keypad

7 test card reader (mag or optical)

8 display baud rate and address

9 test paper cutter

Printers

Star

There are two DIP switch banks on the Star printer.

Each position must be set as follows:

DIP Switch Bank 1

Position & Definition Required Setting

1-3 9600 baud on

4 stop bit 1 on

5 X-on/X-off mode off

6 8 data bits on

7 no parity on

8 even parity off

DIP Switch Bank 2

Position & Definition Required Setting

1 USA character set on

2 USA character set on

3 printer type on

4 CR valid off

Island Card

Reader II

CPU Board

Part number: C05857.

Works with program software 5.0 and above.

Notes

Beckman display not supported

Motorized reader not supported

Novatronics printer not supported

Switches

DIP Switch Bank

DIP switch on the reader terminal CPU board sets

options, including the reader terminal address:

Position & Definition Setting(*=customary)

1 not used not used

2 decimal point

*open=enable

closed=disabled

3 1 or 2 line display

*closed=1 line

open=2 line

4 reader type see below

5 gate reader

*open=disabled

closed=enabled

6 reader type see below

7-10 address see below

Reader Type 4 6

mag swipe without optical closed closed

mag swipe with optical closed open

mag insert open closed

optical closed open

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 63 64

Komentáře k této Příručce

Žádné komentáře

Gasboy CFN III Quick Reference Guide v3.3 Uživatelský manuál Strana 42

Komentáře k této Příručce

Související produkty a manuály pro Hardware Gasboy CFN III Quick Reference Guide v3.3