Gasboy CFN Site Controller Uživatelský manuál stáhnout pdf (Strana 49)

Pump Interface Manual v1.3 Wayne 41

03/20/03 Gasboy CFN Series

The SCII K1 (port 1) or K2 (port 3) jumper patch must be configured for a Wayne port.

Below is the system layout for the Wayne interface and a SCII.

K2 Jumper Settings.

CFN3 cabling

The Wayne 2400 Controller is connected to either ports 4, 5 or 6 of the CFN3 with a C06006

cable. The cable comes in 8 ft lengths. The maximum distance for this cable is 100 ft.

SCII and CFN3 Configurations

SYS_PAR.BIN, page 8

In SYS_PAR.BIN (page 8), the “Special pump handler channel” parameter must be configured

for the ports listed under cabling for either the SCII or CFN3 (see previous sections).

Male DB-25P

Connector

Female DB-

25S

Connector

20 20

Site Controller II

Wayne

2400

Site Controller

Wayne Cable

C04654

To pumps/dispensers

Interface cable must be plugged into port 3 or port 1

of the Site Controller II

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 69 70

Žádné komentáře

Gasboy CFN Site Controller Uživatelský manuál Strana 49